• Set up WiFi
  • Connect to a WiFi AP

Set up WiFi

Connect to a WiFi AP

• Edit wpa_supplicant.conf using: vi /data/misc/wifi/wpa_supplicant.conf
• Fill in the ssid and psk of wifi as follows:

  update_config=1
  eapol_version=1
  ap_scan=1
  fast_reauth=1
  pmf=1
  p2p_add_cli_chan=1
  network={
    ssid=”wifissid1”
    psk=”wifipsk1”
  }
  Network={
    ssid=”wifissid2”
    psk=”wifipsk2”
  }
  

• Restart the device and connect to wifi.
• Run the following commands to confirm that the device is connected to wifi: ```Shell ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:0A:F5:83:66:EF inet addr:192.168.43.92 Bcast:192.168.43.255 Mask:255.255.255.0 inet6 addr: fe80::20a:f5ff:fe83:66ef%1736140884/64 Scope:LinkUP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15 errors:0 dropped:0 overruns:0 frame:0 TX packets:18 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3000 RX bytes:1864 (1.8 KiB) TX bytes:1828 (1.7 KiB)

ping www.qualcomm.com PING www.qualcomm.com (23.59.93.51): 56 data bytes 64 bytes from 23.59.93.51: seq=0 ttl=48 time=171.722 ms 64 bytes from 23.59.93.51: seq=1 ttl=48 time=163.070 ms 64 bytes from 23.59.93.51: seq=2 ttl=48 time=244.932 ms 64 bytes from 23.59.93.51: seq=3 ttl=48 time=166.135 ms ```