Hi
I have tried the releases 17.06, 18.01, 19.01. I have compiled the kernel with the change from this commit and used this dt-update tool.
Just by removing the disabled status from those 4 lines in the .dtsi file is it supposed to work?
But still have the error I mentioned before. My kernel has more errors than the kernel from @ljking :
[ 9.550623] media: Linux media interface: v0.10
[ 9.566673] Linux video capture interface: v2.00
[ 9.615740] qcom-venus 1d00000.video-codec: Linked as a consumer to 1ef0000.iommu
[ 9.615835] iommu: Adding device 1d00000.video-codec to group 0
[ 9.641882] i2c-qcom-cci 1b0c000.cci: Master 0 error 0x08000000
[ 9.645956] i2c-qcom-cci 1b0c000.cci: master 0 queue 0 error -5
[ 9.648406] qcom,pm8916-wcd-spmi-codec 200f000.spmi:pm8916@1:codec@f000: DT property missing, MBHC btn detection disabled
[ 9.653101] i2c-qcom-cci 1b0c000.cci: cci i2c xfer error -5
[ 9.653110] ov5645 4-003b: ov5645_write_reg_to: write reg error -5 on addr 0x3a: reg=0x3100, val=0x76
[ 9.669386] ov5645 4-003b: could not change i2c address
[ 9.681644] ov5645 4-003b: could not power up OV5645
[ 9.685988] ov5645: probe of 4-003b failed with error -5
[ 9.828917] qcom-camss 1b0ac00.camss: Linked as a consumer to 1ef0000.iommu
[ 9.829007] iommu: Adding device 1b0ac00.camss to group 1
…
More information about the current state of the system:
A loaded kernel module called: ov5645
/dev/i2c-0, /dev/i2c-1, /dev/i2c-3, /dev/i2c-4
ls /proc/iomem:
01b00020-01b0002f : csi_clk_mux
01b00030-01b00033 : csiphy0_clk_mux
01b00038-01b0003b : csiphy1_clk_mux
01b08000-01b080ff : csid0
01b08400-01b084ff : csid1
01b0a000-01b0a4ff : ispif
01b0ac00-01b0adff : csiphy0
01b0b000-01b0b1ff : csiphy1
01b0c000-01b0cfff : /soc/cci@1b0c000
01b10000-01b10fff : vfe0
Does the MIPI Aistarvision V2.1 has been tested by someone else?
Could this be related to ADV HDMI? As mentioned here.
Beforehand, thanks for nay help.